The newly updated Standard 169, Climatic Data for Building Design Standards, serves as a comprehensive source of climate data for those involved in building design, and provides a variety of climatic information for designing, planning and sizing building energy systems and equipment.
“Using the results from ASHRAE Research Project 1453 ‘Updating the ASHRAE Climatic Data for Design and Standards,’ the data and tables in the standard were completely replaced,” says Dru Crawley, chair of the committee writing the standard.
An additional “Extremely Hot” Climate Zone 0 with humid (0A) and dry (0B) zones has been added, and the standard now includes climatic data for 5,564 locations throughout the world.
“With this major revision, Standard 169 now includes climate zone maps for the entire world, as opposed to the 2006 standard which only included a U.S. climate zone map,” Crawley says. “This allows users outside the U.S. to more easily determine which climate zone their location is in.”
The standard touches on dry-bulb, dew-point and wet-bulb temperatures; enthalpy; humidity ration; wind conditions; solar irradiation; latitude; longitude; and elevation for locations worldwide.
Standard 169 also includes statistical data, such as mean temperatures; daily ranges; degree hours; and seasonal percentages within ranges of temperatures, to name just a few.
The cost of ANSI/ASHRAE Standard 169, Climatic Data for Building Design Standards, is $72 ($61, ASHRAE members). To order, contact ASHRAE Customer Contact Center at (800) 527-4723 (U.S. and Canada) or (404) 636-8400 (worldwide) or fax (678) 539-2129.