Realizing there was no easy and cost-effective way to apply rapid-cure sealants for small applications with minimal setup time and little material waste, BASF discovered the Sulzer MIXPAC MixCoat system for small and touchup applications in roofing. Only an air compressor and a MixCoat spray system are needed. Preparation time can be reduced to 15 minutes. With MixCoat’s use of cartridges, very small areas can be coated while minimizing coating waste, and partially used cartridges can be recapped and reused for the next project. The prefilled cartridges also protect the applicator from direct contact with unmixed material, adding another layer of safety. In addition, the MixCoat system uses low pressure compressed air, 7 bar (100 psi).
Coat Small Roof Areas while Minimizing Material Waste
By Retrofit Magazine Editor1 Min Read
Previous ArticleAAMA Updates Specification for Forced Entry Resistance
Next Article Air Handlers Fit in Closets