Legrand has launched Cablobend Systems, a flexible wire mesh fitting that saves labor time typically spent by contractors to create vertical drops for data centers. This is the latest offering from the Cablofil brand which is the global benchmark for cable management systems, known for continuous innovation for electrical installations.
The Cablobend Systems provides an entirely new way for contractors to work on data center projects. Every data center requires numerous cable tray bends and drops—sometimes thousands in just one installation. With traditional cutting and bending, each drop can take over four hours to complete. The Cablobend Systems provide the freedom to flexibly create the bends and drops needed with no cutting required.
Cablobend Systems encompass wire mesh grid assemblies that easily bend and flex, giving contractors seamless cable runs at the most difficult installation points. With a wide variety of widths and combinations, it’s easy to create nearly every bend needed with one product. Contractors can simply stretch and bend the flex wires a maximum of 4 inches at any location to fit configurations up to 90-degree horizontally or vertically, or join sections together for increased rigidity and strength. With a variety of widths and combinations available, the system offers the freedom to create exactly what is needed. Available in three heights (2, 4 and 6 inches), seven widths (6, 8, 12, 18 and 24 inches), and two finishes (silver and black), each segment can lock easily in the field for rigidity. The complete system arrives at the job site already welded together and pre-assembled.