Formulated for performance in threaded rod anchor and rebar dowel installations in cracked and uncracked concrete at elevated temperatures, the SET-3G anchoring adhesive is an innovation in epoxy anchoring adhesives from Simpson Strong-Tie.
Application and Installation
The two-component, one-to-one-ratio, epoxy-based anchoring adhesive formula dispenses in a gray color to match surrounding concrete surfaces, and can be installed in downward, horizontal, vertical and overhead orientations.
The SET-3G adhesive is designed for dry or water-saturated use conditions with temperatures anywhere between –40F (–40C) and 176F (80C). The formula also offers contractors jobsite flexibility with its ability to be installed in dry, water-saturated or water-filled holes in base materials whose temperatures range from 40F (4C) to 100F (38C).
Testing Criteria
Available in three sizes, SET-3G adhesive has been tested.
- Tested in accordance with ICC-ES Acceptance Criteria for Adhesive Anchors in Concrete Elements (AC308) and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete.
- Qualified for use in structures assigned to Seismic Design Categories A through F.
- Code listed to work with the Speed Clean DXS dust extraction system, which complies with updated OSHA Silica Dust Compliance Regulations to save time and keep workers safe from hazardous airborne dust.