Greenheck Develops Retaining Angle Installation Method for Its Fire and Fire Smoke Dampers

Greenheck has developed a UL-approved three-sided retaining angle installation method for fire and combination fire smoke dampers. This method is ideal for installations where the damper sleeve is tight up against a wall, floor, or other obstruction with no room for a retaining angle on one side. The installation does not require the use of any firestop material, while other three-sided angle installation methods require fire stop material to be applied to a specified minimum thickness on the side of the damper without the retaining angle. Complying with the minimum thickness requirement without scraping off the fire stop material during installation can be difficult and makes it complicated for building inspectors to confirm that the required amount of fire stop material has been applied. With the three-sided angle installation method, fasteners are run from inside the damper into the wall opening on the side without the retaining angle.

Greenheck, a manufacturer and distributor of air movement, conditioning and control equipment, offers UL certified dampers and a selection of AMCA licensed dampers.

For more information about Greenheck products, visit the website.

Be the first to comment on "Greenheck Develops Retaining Angle Installation Method for Its Fire and Fire Smoke Dampers"

Leave a comment

Your email address will not be published.


*


%d bloggers like this: