Polyurethane Foam Adhesive Is Available in Larger Containers

The construction-grade polyurethane foam adhesive from Mule-Hide Products is available in 15-gallon pony kegs and 50-gallon drums for use in completing larger jobs.

The construction-grade polyurethane foam adhesive from Mule-Hide Products is available in 15-gallon pony kegs and 50-gallon drums for use in completing larger jobs.

Helix Low-Rise Adhesive from Mule-Hide Products Co. is available in 15-gallon pony kegs and 50-gallon drums for use in completing larger jobs.

Helix Low-Rise Adhesive provides adhesion of approved roof insulations, thermal barriers, cover boards and fleece-backed single-ply membranes to a variety of acceptable roofing substrates. The two-component, construction-grade polyurethane foam is applied in a single step, saving crews time.

Both parts of the adhesive (Part A and Part B) are ready to use from the container, no mixing required, and are applied simultaneously in a 1:1 ratio through a static mix tip. The adhesive is applied in continuous ribbons or beads spaced 4-, 6- or 12-inches apart, depending on the project and code requirements. There is no overspray. The adhesive cures fully in minutes.

A pony keg covers approximately 2,350-7,000-square-feet of roof and a drum covers approximately 8,350-25,000-square-feet of roof, depending on bead spacing and substrate properties.

Containers of Part A and Part B are priced separately but must be purchased as a set.

Helix Low-Rise Adhesive is odorless and solvent-free and contains no volatile organic compounds (VOCs), chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs), making it environment-friendly.

The adhesive eliminates the need for mechanical fasteners, maintaining a puncture-free vapor retarder, preventing thermal bridging and protecting the structural integrity of the roof deck.

The bond created by Helix Low-Rise Adhesive also helps roofing systems stand up to Mother Nature. The adhesive provides wind uplift resistance, allowing it to be used on taller buildings and buildings in higher wind zones. In addition, it provides hail resistance when used as an adhesive for fleece-backed membranes.

In addition to the pony kegs and drums, Helix Low-Rise Adhesive remains available in cartridge twin-pack tubes (covering approximately 125-400-square-feet of roof) and two-tank sets (covering approximately 1,000-3,000-square-feet of roof).

Be the first to comment on "Polyurethane Foam Adhesive Is Available in Larger Containers"

Leave a Reply

%d bloggers like this: