Power Packs Ensure Circuit Activation in Power Failure or Emergency

Leviton's OPP20 Power PacksLeviton's OPP20 Power Packs

Leviton's OPP20 Power Packs

Leviton’s OPP20 Power Packs

Leviton has introduced its line of OPP20 Power Packs featuring a “fail safe” design, ensuring circuit activation in power failure and emergency conditions. The four new super-duty Power Pack models surpass NEMA 410 16 Amp ballast overload testing and have exceeded 1.5 million switching cycles at full load. They are ideal for a wide range of applications, including daylight harvesting, CA Title 24/ASHRAE 90.1 plug load control requirements, occupancy sensing control, and bi-level and manual switching applications.

The four new super duty Power Pack models offer a variety of application solutions, including:

  • The OPP20-OD1 is ideal for use in basic auto-ON/auto-OFF applications. It features an Auto-ON occupancy sensor input.
  • The OPP20-OD2 is ideal for use in manual-ON/auto-OFF and auto-ON/auto-OFF applications with local switches. It features an exclusive self-detect local momentary or maintained switch input. Configurable for Auto-ON and Manual-ON occupancy sensor inputs, it is CA Title 24 Compliant and meets ASHRAE 90.1 Plug Load Control requirements.
  • The OPP20-RD3 is ideal for use in auto-ON/auto-OFF and photocell only room control applications. It features an Auto-ON occupancy sensor input and is photocell-ready (switching only).
  • The OPP20-RD4 is ideal for use in all the applications listed above, including the use of a photocell with a local switch and occupancy sensor. It features an exclusive self-detect local momentary or maintained switch input, is configurable for Auto-ON and Manual-ON occupancy sensor inputs and is photocell-ready (switching only). It is CA Title 24 Compliant and meets ASHRAE 90.1 Plug Load Control requirements.

Easy to install, the new Power Pack models feature versatile options for mounting and can be installed inside or outside the fluorescent ballast cavity or junction box. The Power Packs comply with NEMA 410 requirements for electronic ballast current overload and UL/cUL 916 requirements for energy management. They feature output short protection and are factory-calibrated to the zero crossing point on the AC power curve to ensure maximum contactor life and compatibility with LED ballasts. RoHS Compliant, they are plenum-rated, meet UL 2043 standards and are backed by Leviton’s Limited Five-Year Warranty.

www.leviton.com/occupancysensors

Be the first to comment on "Power Packs Ensure Circuit Activation in Power Failure or Emergency"

Leave a comment

Your email address will not be published.


*


%d bloggers like this: