Seal Asphalt Membranes and Flashings with Rubberized Flashing Cement

RGA 1 rubberized flashing cement features a screw-on tip that is removable.

RGA 1 rubberized flashing cement features a screw-on tip that is removable.

RGA 1 rubberized flashing cement from Mule-Hide Products Co. gives contractors an option for sealing asphalt membranes and flashings while providing up to 10 percent more coverage per case.

RGA 1 can be used to seal various substrates, including:

  • SBS modified bitumen seams, laps and perimeter edges
  • splits, cracks, blisters, metal flanges and punctures in asphalt-based roof membranes and flashings
  • tabs, edges, step flashings and valleys in shingled roofs
  • seams and edges in rubberized waterproofing projects
  • concrete or brick at chimney flashings

Packaged in 10-ounce plastic tubes, RGA 1 can be applied to dry and wet surfaces, including submerged surfaces.

A screw-on tip ensures that product is not lost in the tip, providing up to 10 percent more coverage from each case. When using any cartridge-packaged sealant, product is retained in the tip when the tube is empty because there is no longer pressure to push the remaining sealant out of the tip. With RGA 1, the tip can be removed and placed on a new tube, enabling the retained product to be used. With competitive products that have fixed-tip cartridges, the retained product is wasted.

RGA 1 is offered in a single grade, eliminating the need to switch between winter and summer grades with the change of seasons.

RGA 1 is approved for use with Mule-Hide Products self-adhered modified bitumen and APP modified bitumen roofing systems. It is not approved for use on single-ply membranes, under APP modified bitumen or torch products with a burn-off film, or in direct contact with Expanded Polystyrene (EPS) or Extruded Polystyrene (XPS).

Be the first to comment on "Seal Asphalt Membranes and Flashings with Rubberized Flashing Cement"

Leave a Reply

%d bloggers like this: