Larson Electronics releases a 1600-watt skid-mounted five-stage light mast. This tower features a rotating boom that allows for 360 degrees of rotation, a removable mast head and a cube frame with skid pockets with four-corner pick eyes for easy transportation.
The LM-SMDE-30-8-5S-4X400LTL-LED-RD-E2E light mast from Larson Electronics is designed to quickly and safely deploy 1600 watts of intense LED lighting in locations where elevated illumination is needed. This mast is equipped with four 400-watt LED lamps that produce a wide spread of intense white light, allowing this unit to effectively cover large work areas. This light boom can be extended to 30 feet for maximum coverage, collapsed to 8.83 feet and is constructed of square steel tubing in different dimensions for each section. The mast is elevated using an included 2,500 pounds manual hand crank winch with 3/16-inch galvanized braided steel cable. The light heads on this tower are wet area suitable high-output LED fixtures that produce a combined total of approximately 208,000 lumens of light while drawing 1600 watts of power. The 30-foot tower and assembly is powder coated with a glossy blue finish for corrosion resistance and aesthetics.
The mast is bolted onto a 1/8-inch thick carbon steel plate via six 1/3-inch anchor bolts. The mast and controls are secured within a cube-style frame constructed of 2- by 2- by 1/8-inch thick and measuring 48 inches wide by 48 inches long by 53 inches tall. Four 4-foot slide out outriggers with 1,200 pounds manual crank leveling jacks allow operators to anchor the unit down, providing stability during deployment. Eight skid pockets allow this unit to be picked up from all four sides, and four-corner eyelets allow for stable deployment via crane operation. This mast is operated from a centrally located control box with power switches within the cube frame, allowing operators to power the LED light fixtures on or off. Wiring is provided via 150-foot 10/4 SOOW cable terminated in a 30 amp L14-30P twist lock plug. A manual roll up drum mounted within the steel cage frame provides storage for the power cable. A waterproof L14-30C twist lock connector allows up to three units be daisy chained together on 120V circuit or up to three units on a 240V circuit.