Gear Keeper’s ANSI-121 compliant Deluxe TL1-2007 side release wrist lanyard system for tools up to 5 pounds are important when a short drop length is critical when climbing or working in close quarters. Unlike an off-the-shelf lanyard, which can actually become a safety hazard, all Gear Keeper tethering systems insure ANSI-121 safety and quality by the company’s quality control systems. Quality Assurance includes the company’s dynamic and static testing, drop load testing with up to a 100 percent safety margin and cycle testing for safe productive use and long-life.
The TL1-2007 is attached to the wrist by a loop and cinch Velcro strap and connected to the tool by 10-inch lanyard with a barrel lock. Productivity is increased by the patented Quick Connect tool attachment connectors that permit connection / disconnection ease of tools. No need to waste time when working with a variety of different tools. Users can change out tools by having extra lanyards attached to the tools and then unclick one tool and click in another. Additional lanyards are are available in 3 and 10 packs. Contact the company at (888) 588-9981 for more information.
The full line of Gear Keeper ANSI-compliant tethers and accessories are available on the Gear Keeper website. A 16-page, 2019 edition of the “Safety Engineer’s Guide to Tool Tethering” is available here or by calling Customer Service at (888) 588-9981. The guide also includes a 4-page section showing how to safely tether tools with and without attachment points as well as related product information.