Manufacturer Introduces Waterproof Pressure Sensitive Adhesive for Flooring

Aquaflex2 PSA is a patent pending moisture-cure, waterproof pressure sensitive adhesive.

Aquaflex2 PSA is a patent pending moisture-cure, waterproof pressure sensitive adhesive.

Formulators|Aquaflex introduces Aquaflex2 PSA (Pressure Sensitive Adhesive) to its line of patented waterproof technologies marketed as Aquaflex Unlimited Moisture Installation System. Aquaflex2 PSA is a patent pending moisture-cure, waterproof pressure sensitive adhesive that installs identical to industry standard water-based adhesives, avoids mechanical prep, has up to two hours of open time, with a warranted moisture performance from both concrete and topical sources. Aquaflex2 PSA is non-flammable, one-part, non-hazardous, zero VOC, odorless and waterproof. Installation is identical to standard pressure sensitive adhesives. Simply trowel over prepared concrete and allow 30 minutes of flash for tack development. Then install the tile, press to activate bond and roll the floor. Flooring can be installed up to two hours after trowel. After four hours, transitional reactions take place that result in a waterproof bond stronger than standard water-based acrylic adhesive.

Formulators prefers to work through its nationwide network of commercial contractors, independent sales associates and trained technicians. Aquaflex is now specified by several flooring manufacturers, national retailers and healthcare networks. Aquaflex is not only an advancement in moisture installation performance but also represents an evolution in clean, safe and environmentally responsible product development and manufacturing.

Aquaflex2 PSA is:
•Easy… skip wrecking the floor with shot blast.
•Clean… avoid creating concrete dust and meet OSHA compliance.
•Fast… no mixing, just spread, flash 30 minutes, set and roll.
•Safe… bio-based, zero VOC, zero odor, non-hazardous and passes IAQ 01350.
•Pressure Sensitive Characteristics… up to two hours of working time to set tile.
•Universal… works with any flooring tile material, rubber to VCT to LVT to solid vinyl.
•Performance… warranted to an unlimited moisture/pH level.

1 Comment on "Manufacturer Introduces Waterproof Pressure Sensitive Adhesive for Flooring"

  1. Kent Petersen, P.E. | July 26, 2016 at 10:28 am |

    I would like spec sheet on this product and the local dealer…

Leave a Reply

%d bloggers like this: