Portable Power Distribution Station Converts 110V to 220V 1PH

The portable power distribution unit allows operators to tap into 110V AC power from a variety of sources such as generators or direct grid power.
The portable power distribution station allows operators to tap into 110V AC power from a variety of sources such as generators or direct grid power.

Larson Electronics has announced the release of a hazardous location power distribution station that converts single-phase 110V AC electrical current to single-phase 220V AC. This portable unit allows operators to safely tap into 110V AC power from a variety of sources such as generators or direct grid power.

The MGL-HAL-110V-2KVA-220V-1X16A.309-25C power distribution system has a primary side where operators can connect single-phase 110V line-in power through 25 feet of #16 SOOW cord with an IEC 60309 Class I, Division 2, Zone 2 rated cord cap. The secondary side allows operators to connect to one 16-amp IEC 60309 Class I, Division 2, Zone 2 rated receptacle for 220V equipment. This NEMA 3R 2KVA rated unit features receptacles that have weatherproof covers.

This power distribution system features a transformer and load center/distribution assembly that is mounted to a standard upright steel dolly cart style frame and features a rear-mounted kick-stand for deployment ease in any position. The cart style mounting platform provides mobility ease and can be modified to meet a variety of job site needs.

This unit is also available up to 150KVA and can be equipped with skids or trailer mounted. The transformer is grounded to the frame with grounding lug provided and is suitable for indoor or outdoor use and ATEX-rated applications, including construction sites, plant maintenance, plant turnarounds, shows, exhibits, shipyard operations and more.

Be the first to comment on "Portable Power Distribution Station Converts 110V to 220V 1PH"

Leave a comment

Your email address will not be published.


*


%d bloggers like this: