Larson Electronics has announced the release of a 30 KVA mobile power distribution unit that converts 480VAC three phase electrical current into three phase 208Y/120VAC, allowing operators to tap into 480V power from generators, direct grid power and other sources. This power distribution system is mounted on a carbon steel cart with locking casters and is ideal for indoor and outdoor power distribution.
The MGS-4X480.30A-12X277.20A-30KVA-2X120.20A portable power distribution station gives operators the ability to power their 208Y and 120-volt equipment from a single system. On the primary side, operators connect 480V line-in power via cam-lock inputs to four, M35 P29059-M1.22 480V receptacles for 480V equipment and to 12, M35 P29030-M1.22 277V receptacles for 277V equipment. On the secondary side, operators connect to two, GFCI duplex 120V receptacles for 120V equipment. Operators may add additional outlets via three boxes with blank covers.
This power distribution system is mounted on a thick 3/16-inch carbon steel platform with forklift skid pockets, locking casters and lifting eyelets for transportation. This construction offers consistent operation even during demanding use and unfavorable weather conditions. All panels are rated NEMA 3R for indoor and outdoor use and can withstand mildly corrosive elements, dust and moisture. Additionally, the transformer is grounded to the frame and comes with a grounding lug on the frame for the earth ground. The MGS-4X480.30A-12X277.20A-30KVA-2X120.20A is built in accordance to NFPA 70 and certified to UL 1640, and can be custom built to operator specifications.